VLSI Design for Manufacturing: Yield Enhancement / Edition 1

by Stephen W. Director, Wojciech Maly, Andrzej J. Strojwas

Overview

One of the keys to success in the IC industry is getting a new product to market in a timely fashion and being able to produce that product with sufficient yield to be profitable. There are two ways to increase yield: by improving the control of the manufacturing process and by designing the process and the circuits in such a way as to minimize the effect of the inherent variations of the process on performance. The latter is typically referred to as "design for manufacture" or "statistical design". As device sizes continue to shrink, the effects of the inherent fluctuations in the IC fabrication process will have an even more obvious effect on circuit performance. And design for manufacture will increase in importance. We have been working in the area of statistically based computer aided design for more than 13 years. During the last decade we have been working with each other, and individually with our students, to develop methods and CAD tools that can be used to improve yield during the design and manufacturing phases of IC realization. This effort has resulted in a large number of publications that have appeared in a variety of journals and conference proceedings. Thus our motivation in writing this book is to put, in one place, a description of our approach to IC yield enhancement. While the work that is contained in this book has appeared in the open literature, we have attempted to use a consistent notation throughout this book.

Product Details

ISBN-13:	9780792390541
Publisher:	Springer US
Publication date:	11/30/1989
Series:	The Springer International Series in Engineering and Computer Science , #86
Edition description:	1990
Pages:	292
Product dimensions:	6.14(w) x 9.21(h) x 0.24(d)

Table of Contents

1. Yield Estimation and Prediction.- 1.1. Introduction.- 1.2. The VLSI Fabrication Process.- 1.3. Disturbances in the IC Manufacturing Process.- 1.4. Measures of Process Efficiency.- 1.5. Discussion.- 1.6. Overview of the Sequel.- 2. Parametric Yield Maximization.- 2.1. Introduction.- 2.2. Design Centering and Worst Case Design with Arbitrary Statistical Distributions.- 2.3. Example of Worst Case Design.- 2.4. A Dimension Reduction Procedure.- 2.5. Fabrication Based Statistical Design of Monolithic IC’s.- 3. Statistical Process Simulation.- 3.1. Introduction.- 3.2. Statistical Process Simulation.- 3.3. Tuning of Process Simulator with PROMETHEUS.- 3.4. The Process Engineer’s Workbench.- 4. Statistical Analysis.- 4.1. Statistical Timing Simulation.- 4.2. An Improved Worst-Case Analysis Procedure.- 4.3. Optimal Device and Cell Design Using FABRICS.- 5. Functional Yield.- 5.1. Introduction.- 5.2. Basic Characteristics of Spot Defects.- 5.3. Yield Modeling Using Virtual Layout.- 5.4. Monte Carlo Approach to Functional Yield Prediction.- 5.5. Yield Computations for VLSI Cell.- 6. Computer-Aided Manufacturing.- 6.1. Motivation.- 6.2. Overview of the CMU-CAM System.- 6.3. Statistical Process Control: The Unified Framework.- 6.4. CMU-CAM Software System.- 6.5. Computational Examples.- 6.6. Conclusions.- References.