Thermomechanics & Infrared Imaging, Inverse Problem Methodologies, Mechanics of Additive & Advanced Manufactured Materials, and Advancements in Optical Methods & Digital Image Correlation, Volume 4: Proceedings of the 2021 Annual Conference on Experimenta

by Sharlotte L.B. Kramer (Editor), Rachael Tighe (Editor), Ming-Tzer Lin (Editor), Cosme Furlong (Editor), Chi-Hung Hwang (Editor)

Overview

Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, and Advancement of Optical Methods & Digital Image Correlation, Volume 4 of the Proceedings of the 2021 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of four from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:

Test Design and Inverse Method Algorithms

Inverse Problems: Virtual Fields Method

Material Characterizations Using Thermography

Fatigue, Damage & Fracture Evaluation Using Infrared Thermography

Mechanics of Additive & Advanced Manufactured Materials

DIC Methods & Its Applications

Photoelasticity and Interferometry Applications

Micro-Optics and Microscopic Systems

Multiscale and New Developments in Optical Methods

Product Details

ISBN-13:	9783030867478
Publisher:	Springer International Publishing
Publication date:	02/14/2022
Series:	Conference Proceedings of the Society for Experimental Mechanics Series
Edition description:	1st ed. 2022
Pages:	105
Product dimensions:	8.27(w) x 10.98(h) x (d)

About the Author

Dr. Sharlotte L.B. Kramer is with Sandia National Laboratories, Albuquerque, NM, USA; Dr. Rachael Tighe is with the University of Waikato, New Zealand; Dr. Ming-Tzer Lin is with the National Chung Hsing University, Taiwan; Dr. Cosme Furlong is with the Worcester Polytechnic Institute, USA; and Dr. Chi-Hung Hwang-Instrument Technology Research Center/NARlabs, Taiwan.

Table of Contents

Chapter 1. Super Resolution Optical Microscopy to Detect Virus (SARS-CoV-2) in Real Time.- Chapter 2. Mesostructure Evolution During Powder Compression: Micro-CT Experiments and Particle-Based Simulations.- Chapter 3. Surface Pressure Reconstruction in Shock Tube Tests Using the Virtual Fields Method.- Chapter 4. Stress Concentration Evaluation of a Plate with Symmetrical U-notches Under Tensile Load Using TSA and a Lepton IR Camera.- Chapter 5. Evaluation of Thermal Deformation of Fastening Structure of Carbon Fiber Reinforced Plastic and Aluminum Using Stereo Image Correlation.- Chapter 6. Full-field Analysis of Strain-induced Crystallization in Natural Rubber.- Chapter 7. Evaluating Pulse Simulator Using Fluorescent DIC.- Chapter 8. Predicting Temperature Field in Powder-Bed Fusion (PBF) Additive Manufacturing Process Using Radial Basis Neural Network (RBNN).- Chapter 9. Thermoelastic Characterization of 3D Printed Thermoplastic Elastomers.- Chapter 10. Reduction of Micro-crack in Ni-based Superalloy IN-713LC Produced by Laser Powder Bed Fusion.- Chapter 11. Thermomechanical Analysis of Shape Memory Polymers in Equi-Biaxial Condition by Means of Hydraulic Bulge Test.- Chapter 12. Inverse Identification of the Post-necking Behavior of Metal Samples Produced with Additive Manufacturing.- Chapter 13. Heat Source Reconstruction Applied to Fatigue Characterization Under Varying Stress Amplitude.- Chapter 14. Analysis of the Thermomechanical Response of a Rubber-like Granular Material.- Chapter 15. Which Pattern for a Low Pattern-induced Bias?.