RF Microelectronics / Edition 2 available in Hardcover, eBook
- ISBN-10:
- 0137134738
- ISBN-13:
- 9780137134731
- Pub. Date:
- 09/22/2011
- Publisher:
- Pearson Education
- ISBN-10:
- 0137134738
- ISBN-13:
- 9780137134731
- Pub. Date:
- 09/22/2011
- Publisher:
- Pearson Education
Buy New
$166.25Buy Used
$97.05-
PICK UP IN STORE
Your local store may have stock of this item.
Available within 2 business hours
-
SHIP THIS ITEM
Temporarily Out of Stock Online
Please check back later for updated availability.
Overview
Wireless communication has become almost as ubiquitous as electricity, but RF design continues to challenge engineers and researchers. In the 15 years since the first edition of this classic text, the demand for higher performance has led to an explosive growth of RF design techniques. In RF Microelectronics, Second Edition, Behzad Razavi systematically teaches the fundamentals as well as the state-of-the-art developments in the analysis and design of RF circuits and transceivers.
Razavi has written the second edition to reflect today’s RF microelectronics, covering key topics in far greater detail. At nearly three times the length of the first edition, the second edition is an indispensable tome for both students and practicing engineers. With his lucid prose, Razavi now
- Offers a stronger tutorial focus along with hundreds of examples and problems
- Teaches design as well as analysis with the aid of step-by-step design procedures and a chapter dedicated to the design of a dual-band WiFi transceiver
- Describes new design paradigms and analysis techniques for circuits such as low-noise amplifiers, mixers, oscillators, and frequency dividers
This edition’s extensive coverage includes brand new chapters on mixers, passive devices, integer-N synthesizers, and fractional-N synthesizers. Razavi’s teachings culminate in a new chapter that begins with WiFi’s radio specifications and, step by step, designs the transceiver at the transistor level.
Coverage includes
- Core RF principles, including noise and nonlinearity, with ties to analog design, microwave theory, and communication systems
- An intuitive treatment of modulation theory and wireless standards from the standpoint of the RF IC designer
- Transceiver architectures such as heterodyne, sliding-IF, directconversion, image-reject, and low-IF topologies.
- Low-noise amplifiers, including cascode common-gate and commonsource topologies, noise-cancelling schemes, and reactance-cancelling configurations
- Passive and active mixers, including their gain and noise analysis and new mixer topologies
- Voltage-controlled oscillators, phase noise mechanisms, and various VCO topologies dealing with noisepower-tuning trade-offs
- All-new coverage of passive devices, such as integrated inductors, MOS varactors, and transformers
- A chapter on the analysis and design of phase-locked loops with emphasis on low phase noise and low spur levels
- Two chapters on integer-N and fractional-N synthesizers, including the design of frequency dividers
- Power amplifier principles and circuit topologies along with transmitter architectures, such as polar modulation and outphasing
Product Details
ISBN-13: | 9780137134731 |
---|---|
Publisher: | Pearson Education |
Publication date: | 09/22/2011 |
Series: | Prentice Hall Communications Engineering and Emerging Technologies Series from Ted Rappaport Series |
Edition description: | New Edition |
Pages: | 960 |
Product dimensions: | 8.30(w) x 10.00(h) x 1.50(d) |
About the Author
Read an Excerpt
Preface
The annual worldwide sales of cellular phones has exceeded $2.5B. With 4.5 million customers, home satellite networks comprise a $2.5B industry. The global positioning system is expected to become a $5B market by the year 2000. In Europe, the sales of equipment and services for mobile communications will reach $30B by 1998. The statistics are overwhelming.
The radio frequency (RF) and wireless market has suddenly expanded to unimaginable dimensions. Devices such as pagers, cellular and cordless phones, cable modems, and RF identification tags are rapidly penetrating all aspects of our lives, evolving from luxury items to indispensable tools. Semiconductor and system companies, small and large, analog and digital, have seen the statistics and are striving to capture their own market share by introducing various RF products. RF design is unique in that it draws upon many disciplines unrelated to integrated circuits (ICs). The RF knowledge base has grown for almost a century, creating a seemingly endless body of literature for the novice.
This book deals with the analysis and design of RF integrated circuits and systems. Providing a systematic treatment of RF electronics in a tutorial language, the book begins with the necessary background knowledge from microwave and communication theory and leads the reader to the design of RF transceivers and circuits. The text emphasizes both architecture and circuit level issues with respect to monolithic implementation in VLSI technologies.
The primary focus is on bipolar and CMOS design, but most of the concepts can be applied to other technologies as well. The reader is assumed to have a basic understanding of analog IC design and the theory of signals and systems. The book consists of nine chapters.
Chapter 1 gives a general introduction, posing questions and providing motivation for subsequent chapters.
Chapter 2 describes basic concepts in RF and microwave design, emphasizing the effects of nonlinearity and noise.
Chapters 3 and 4 take the reader to the communication system level, giving an overview of modulation, detection, multiple access techniques, and wireless standards. While initially appearing to be unnecessary, this material is in fact essential to the concurrent design of RF circuits and systems.
Chapter 5 deals with transceiver architectures, presenting various receiver and transmitter topologies along with their merits and drawbacks. This chapter also includes a number of case studies that exemplify the approaches taken in actual RF products.
Chapters 6 through 9 address the design of RF building blocks: low-noise amplifiers and mixers, oscillators, frequency synthesizers, and power amplifiers , with particular attention to minimizing the number of off-chip components. An important goal of these chapters is to demonstrate how the system requirements define the parameters of the circuits and how the performance of each circuit impacts that of the overall transceiver.
I have taught approximately 80% of the material in this book in a 4-unit graduate course at UCLA. Chapters 3, 4, 8, and 9 had to be shortened in a ten-week quarter, but in a semester system they can be covered more thoroughly. Much of my RF design knowledge comes from interactions with colleagues.Helen Kim, Ting-Ping Liu, and Dan Avidor of Bell Laboratories, and David Su and Andrew Gzegorek of Hewlett-Packard Laboratories have contributed to the material in this book in many ways. The text was also reviewed by a number of experts: Stefan Heinen (Siemens), Bart Jansen (Hewlett-Packard), Ting-Ping Liu (Bell Labs), John Long (University of Toronto), Tadao Nak-agawa (NTT), Gitty Nasserbakht (Texas Instruments), Ted Rappaport (Virginia Tech), Tirdad Sowlati (Gennum), Trudy Stetzler (Bell Labs), David Su (Hewlett-Packard), and Rick Wesel (UCLA). In addition, a number of UCLA students, including Farbod Behbahani, Hooman Darabi, John Leete, and Jacob Rael, test drove various chapters and provided useful feedback. I am indebted to all of the above for their kind assistance. I would also like to thank the staff at Prentice Hall, particularly Russ Hall, Maureen Diana, and Kerry Reardon for their support.
Behzad RazaviJuly 1997
Table of Contents
Preface to the Second Edition xvPreface to the First Edition xix
Acknowledgments xxi
About the Author xxiii
Chapter 1: Introduction to RF and Wireless Technology 1
1.1 A Wireless World 11.2 RF Design Is Challenging 3
1.3 The Big Picture 4
References 5
Chapter 2: Basic Concepts in RF Design 7
2.1 General Considerations 72.2 Effects of Nonlinearity 14
2.3 Noise 35
2.4 Sensitivity and Dynamic Range 58
2.5 Passive Impedance Transformation 62
2.6 Scattering Parameters 71
2.7 Analysis of Nonlinear Dynamic Systems 75
2.8 Volterra Series 77
References 86
Problems 86
Chapter 3: Communication Concepts 91
3.1 General Considerations 913.2 Analog Modulation 93
3.3 Digital Modulation 99
3.4 Spectral Regrowth 118
3.5 Mobile RF Communications 119
3.6 Multiple Access Techniques 123
3.7 Wireless Standards 130
3.8 Appendix I: Differential Phase Shift Keying 151
References 152
Problems 152
Chapter 4: Transceiver Architectures 155
4.1 General Considerations 1554.2 Receiver Architectures 160
4.3 Transmitter Architectures 226
4.4 OOK Transceivers 248
References 249
Problems 250
Chapter 5: Low-Noise Amplifiers 255
5.1 General Considerations 2555.2 Problem of Input Matching 263
5.3 LNA Topologies 266
5.4 Gain Switching 305
5.5 Band Switching 312
5.6 High-IP2 LNAs 313
5.7 Nonlinearity Calculations 325
References 333
Problems 333
Chapter 6: Mixers 337
6.1 General Considerations 3376.2 Passive Downconversion Mixers 350
6.3 Active Downconversion Mixers 368
6.4 Improved Mixer Topologies 393
6.5 Upconversion Mixers 408
References 424
Problems 425
Chapter 7: Passive Devices 429
7.1 General Considerations 4297.2 Inductors 431
7.3 Transformers 470
7.4 Transmission Lines 476
7.4.1 T-Line Structures 478
7.5 Varactors 483
7.6 Constant Capacitors 490
References 495
Problems 496
Chapter 8: Oscillators 497
8.1 Performance Parameters 4978.2 Basic Principles 501
8.3 Cross-Coupled Oscillator 511
8.4 Three-Point Oscillators 517
8.5 Voltage-Controlled Oscillators 518
8.6 LC VCOs with Wide Tuning Range 524
8.7 Phase Noise 536
8.8 Design Procedure 571
8.8.1 Low-Noise VCOs 573
8.9 LO Interface 575
8.10 Mathematical Model of VCOs 577
8.11 Quadrature Oscillators 581
8.12 Appendix I: Simulation of Quadrature Oscillators 592
References 593
Problems 594
Chapter 9: Phase-Locked Loops 597
9.1 Basic Concepts 5979.2 Type-I PLLs 600
9.3 Type-II PLLs 611
9.4 PFD/CP Nonidealities 627
9.5 Phase Noise in PLLs 638
9.6 Loop Bandwidth 645
9.7 Design Procedure 646
9.8 Appendix I: Phase Margin of Type-II PLLs 647
References 651
Problems 652
Chapter 10: Integer-N Frequency Synthesizers 655
10.1 General Considerations 65510.2 Basic Integer-N Synthesizer 659
10.3 Settling Behavior 661
10.4 Spur Reduction Techniques 664
10.5 PLL-Based Modulation 667
10.6 Divider Design 673
References 712
Problems 713
Chapter 11: Fractional-N Synthesizers 715
11.1 Basic Concepts 71511.2 Randomization and Noise Shaping 718
11.3 Quantization Noise Reduction Techniques 738
11.4 Appendix I: Spectrum of Quantization Noise 748
References 749
Problems 749
Chapter 12: Power Amplifiers 751
12.1 General Considerations 75112.2 Classification of Power Amplifiers 760
12.3 High-Efficiency Power Amplifiers 770
12.4 Cascode Output Stages 776
12.5 Large-Signal Impedance Matching 780
12.6 Basic Linearization Techniques 782
12.7 Polar Modulation 790
12.8 Outphasing 802
12.9 Doherty Power Amplifier 811
12.10 Design Examples 814
References 830
Problems 831
Chapter 13: Transceiver Design Example 833
13.1 System-Level Considerations 83313.2 Receiver Design 848
13.3 TX Design 861
13.4 Synthesizer Design 869
References 886
Problems 886
Index 889
Preface
The annual worldwide sales of cellular phones has exceeded $2.5B. With 4.5 million customers, home satellite networks comprise a $2.5B industry. The global positioning system is expected to become a $5B market by the year 2000. In Europe, the sales of equipment and services for mobile communications will reach $30B by 1998. The statistics are overwhelming.
The radio frequency (RF) and wireless market has suddenly expanded to unimaginable dimensions. Devices such as pagers, cellular and cordless phones, cable modems, and RF identification tags are rapidly penetrating all aspects of our lives, evolving from luxury items to indispensable tools. Semiconductor and system companies, small and large, analog and digital, have seen the statistics and are striving to capture their own market share by introducing various RF products. RF design is unique in that it draws upon many disciplines unrelated to integrated circuits (ICs). The RF knowledge base has grown for almost a century, creating a seemingly endless body of literature for the novice.
This book deals with the analysis and design of RF integrated circuits and systems. Providing a systematic treatment of RF electronics in a tutorial language, the book begins with the necessary background knowledge from microwave and communication theory and leads the reader to the design of RF transceivers and circuits. The text emphasizes both architecture and circuit level issues with respect to monolithic implementation in VLSI technologies.
The primary focus is on bipolar and CMOS design, but most of the concepts can be applied to other technologies as well. The reader is assumed to have a basic understanding of analog ICdesign and the theory of signals and systems. The book consists of nine chapters.
Chapter 1 gives a general introduction, posing questions and providing motivation for subsequent chapters.
Chapter 2 describes basic concepts in RF and microwave design, emphasizing the effects of nonlinearity and noise.
Chapters 3 and 4 take the reader to the communication system level, giving an overview of modulation, detection, multiple access techniques, and wireless standards. While initially appearing to be unnecessary, this material is in fact essential to the concurrent design of RF circuits and systems.
Chapter 5 deals with transceiver architectures, presenting various receiver and transmitter topologies along with their merits and drawbacks. This chapter also includes a number of case studies that exemplify the approaches taken in actual RF products.
Chapters 6 through 9 address the design of RF building blocks: low-noise amplifiers and mixers, oscillators, frequency synthesizers, and power amplifiers , with particular attention to minimizing the number of off-chip components. An important goal of these chapters is to demonstrate how the system requirements define the parameters of the circuits and how the performance of each circuit impacts that of the overall transceiver.
I have taught approximately 80% of the material in this book in a 4-unit graduate course at UCLA. Chapters 3, 4, 8, and 9 had to be shortened in a ten-week quarter, but in a semester system they can be covered more thoroughly. Much of my RF design knowledge comes from interactions with colleagues.Helen Kim, Ting-Ping Liu, and Dan Avidor of Bell Laboratories, and David Su and Andrew Gzegorek of Hewlett-Packard Laboratories have contributed to the material in this book in many ways. The text was also reviewed by a number of experts: Stefan Heinen (Siemens), Bart Jansen (Hewlett-Packard), Ting-Ping Liu (Bell Labs), John Long (University of Toronto), Tadao Nak-agawa (NTT), Gitty Nasserbakht (Texas Instruments), Ted Rappaport (Virginia Tech), Tirdad Sowlati (Gennum), Trudy Stetzler (Bell Labs), David Su (Hewlett-Packard), and Rick Wesel (UCLA). In addition, a number of UCLA students, including Farbod Behbahani, Hooman Darabi, John Leete, and Jacob Rael, test drove various chapters and provided useful feedback. I am indebted to all of the above for their kind assistance. I would also like to thank the staff at Prentice Hall, particularly Russ Hall, Maureen Diana, and Kerry Reardon for their support.
Behzad RazaviJuly 1997