Table of Contents
Preface, Traction and energy characteristics of no-contact electric mining locomotives, with AC current thyristor converters, Universal model of the galvanic battery as a tool for calculations of electric vehicles, Binarization algorithm of rock photo images on inhomogeneous background, Compensation of the cogging torque by means of control system for transverse flux motor, Control of tandem-type two-wheel vehicle at various notion modes along spatial curved lay of line, Independent power supply of menage objects based on biosolid oxide fuel systems, The use of asymmetric power supply during the procedure of equivalent circuit parameters identification of squirrel-cage induction motor, Energy indexes of modern skip lifting plants of coal mines, Informational and methodological support for energy efficiency control, Implementation of the insulation resistance control method for high-voltage grids of coal mines, Comparative analysis of methods for estimating the Hurst acoustic signal whenever feed rate control in jet mills provided, Automatic control of coal shearer providing effective use of installed power, Designing algorithm for coal shearer control to provide decrease in specific power consumption, Optimization of fine grinding on the acoustic monitoring basis, Flexible couplings with rubber-cord shells in heavy machinery drives, Determination of optimal configuration of effective energy supply system with multiple sources, Simulation of the energy-effective operating modes of the mine main pumping, A new method to solve a continuous facility location problem under uncertainty, Identification of stabilizing modes for the basic parameters of drilling tools, The hydraulic impact and alleviation phenomena numeric modeling in the industrial pumped pipelines, On an approach to solving of multi-zone dynamics models identification problems, Identification, prediction and control of complex multiply technological objects, Simulation of methane concentration process control at coalmine, Formation of the classification space of the expert system knowledge base for SCADA failure diagnostics, Design of subordinate control system with two degrees of freedom, Anaerobic digestion model of solid wastes in small biogas plants: influence of natural convection on biogas production, The electromechanical system of the turning machine tool
